TYLASKA
SPOOL SHACKLE™

Ideal for Halyards, Genoa Sheets, etc.
Tremendous Strength
Extremely Lightweight
Flog-Proof
Easy to Fasten and Unfasten
Will Not Jam Up
Eight Sizes (2, 3, 5, 8, 12, P4, 20, 30) in break strengths from 2,000 lb - 30,000 lb for line sizes 1/8" (3mm) - 3/4" (20mm)

 

 

This revolutionary new shackle from Tylaska replaces the age-old knot! Unlike a conventional knot, the Tylaska Spool Shackle™ will not jam up and remains easy to fasten and unfasten even after loading up to the tensile strength of the line.


The S-Series Tylaska Spool Shackle™ is machined from high-strength aluminum. The P4 version of the Tylaska Spool Shackle™ is made of high-impact polycarbonate. Both have exceptional strength-to-weight ratio. The key is that the line itself supplies the strength while the shackle redirects the force. The ease of unfastening after loading is equally amazing. Based upon the concept of "breaking the back" of a bowline knot, the line can be rolled back and taken off even after it becomes "stiff as a wire" from tension.

The Tylaska Spool Shackle™ works with both conventional and hi-tech lines. All that is needed is a looped end. This can be a pre-spliced loop, yet-to-be spliced loop, or simply an overhand knot loop. A retaining pin allows for the shackle to be removed or transferred to other lines. An optional "O" ring slides over the line to provide a secondary "lock" against loosening during the most severe flogging situations.

 


  Every unit is pull tested and released under several different load conditions before shipping.  
 
Contact Us   |   © 2005 Tylaska Marine Hardware   |   (860) 572-8440